The fiber fabric air duct can achieve the purpose of energy saving and environmental protection from three aspects:
In the design stage, the traditional central air-conditioning air outlet system must be designed by calculating the resistance balance of each pipe section and the air volume of the tuyere. Due to the insufficient integration of the system and the uneven air distribution, the traditional air duct cannot achieve the predetermined effect of the design. Only by increasing the power of the equipment can make up for it. The fiber fabric air duct uses professional software for system design according to the different requirements of the environment. CFD technology can accurately predict the air flow and air temperature gradient conditions in every place in the environment.
In the operating phase of the system, the traditional central air-conditioning iron sheet duct has a large wind resistance, and in order to make up for the loss of air volume in this respect, the power of the large equipment is correspondingly increased. The fiber fabric cloth duct can minimize the wind resistance in this respect, because the dimensional fabric cloth duct adopts a circular design. In the selection of ventilation ducts, the wind resistance of the circular duct is the smallest, which greatly achieves the purpose of energy saving.
In the maintenance and cleaning stage of the system, the iron sheet ventilation duct of the central air conditioner will deposit certain dust in the air duct after the system is running for a period of time. This dust increases the duct resistance on the one hand, and at the same time provides a place for the growth of bacteria, threatening people's health, increasing the active power loss of the equipment. Moreover, cleaning the air duct of the central air conditioner requires a high cost. The fiber fabric cloth duct system uses the characteristics of the fiber itself to allow the system to filter the air to improve the cleanliness of the air in the air-conditioned area. At the same time, the system is very convenient to disassemble and clean, the duct can be cleaned as new. And the normal use of the work area will soon resume, which can better meet the requirements of energy saving and environmental protection.